Phoenix LiDAR Systems User Manual
CtrlK
  • Welcome
  • SpatialExplorer 8 & 9
    • Introduction
    • Installation
    • User Interface
    • Workflows
    • FAQs
  • LiDARMill Cloud
    • Introduction
    • Login/Register
    • Quick Start Guide
    • Overview
    • Post Processing Workflow
    • FAQs
  • FlightPlanner
    • Introduction
    • User Interface
    • Workflow
    • Overlap
    • FAQs
  • Hardware and Interfaces
    • Warnings and Safety Notices
    • Connecting and Interfacing with Phoenix Lidar Systems
    • NavBox
    • Camera
    • Lidars
    • Inertial Navigation System
    • Miscellaneous Hardware
  • Data Acquisition and UAV Piloting
    • Flight Planning
    • UAV Data Acquisition
    • Mobile Acquisition
    • Backpack Acquisition
    • SLAM Acquisition
    • Navigation System Configuration
    • RECON UAV Acquisition
    • RECON Series Quick Start Guides
      • RECON-XT M300/M350
      • RECON-XT-A FreeFly Astro
      • RECON-A
    • Calibration Flight Strategy
    • Acquisition FAQs
    • Post Acquisition Checks
  • MissionGuidance
    • Introduction
    • Flightplans
    • Heightmaps
    • Setup
    • Operations
  • GNSS Hardware and Ground Control
    • Reference Stations
    • Downloading Reference Station Data
    • Ground Control - Best Practices
    • Stonex S-900 and Cube-A
  • Reports
    • Processing Report
    • Project Report
    • Trajectory Report
  • 3rd Party Software Documentation
    • Bathymetric LiDAR Processing in RiProcess
    • RiParameter
    • TerraSolid and Spatix Install
    • Orthomosaic Production with Pix4D
    • InertialExplorer Desktop 8.70 - 8.90 Processing
    • Hyperspectral Data Processing
    • SDCImport Filter Options
  • Image Processing using PhaseOne IXCapture
  • Converting HEIF and Raw Images to JPG using Sony's IEDT
  • General FAQ
    • Accuracy Standards & Quantification
    • Mapping Terms and Definitions
    • Abbreviations
    • Examples: How to ensure accurate Georeferencing of Trajectories and Pointclouds
    • Clock bias adjustment
    • General FAQs
  • Legacy Documentation
    • Offsets, Rotations, and Reference Frames: SpatialExplorer Version 4-7
    • Legacy TerraSolid Documentation
    • Legacy SpatialExplorer Documentation
Powered by GitBook
On this page
  1. Data Acquisition and UAV Piloting
  2. RECON Series Quick Start Guides

RECON-A

RECON-A Quick Start Guide

625KB
RECON-A Quick Start Guide_2-up.pdf
PDF
Open
PreviousRECON-XT-A FreeFly AstroNextCalibration Flight Strategy

Last updated 9 months ago