Phoenix LiDAR Systems User Manual
Ctrlk
  • Welcome
  • SpatialExplorer 8 & 9
    • Introduction
    • Installation
    • User Interface
    • Workflows
    • FAQs
  • LiDARMill Cloud
    • Introduction
    • Login/Register
    • Quick Start Guide
    • Overview
    • Post Processing Workflow
    • FAQs
  • FlightPlanner
    • Introduction
    • User Interface
    • Workflow
    • Overlap
    • FAQs
  • Hardware and Interfaces
    • Warnings and Safety Notices
    • Connecting and Interfacing with Phoenix Lidar Systems
      • Connect via Rover's Web Interface
      • Connecting via SpatialExplorer
        • Base Station (Notebook) Setup
        • Connect to Rover
        • User Interface
          • Settings
            • Rover Settings
            • Local Settings
          • System Monitor
          • Sensors
          • Satellites
      • Downloading Rover Data
      • Updating Rover
    • NavBox
    • Camera
    • Lidars
    • Inertial Navigation System
    • Miscellaneous Hardware
  • Data Acquisition and UAV Piloting
    • Flight Planning
    • UAV Data Acquisition
    • Mobile Acquisition
    • Backpack Acquisition
    • SLAM Acquisition
    • Navigation System Configuration
    • RECON UAV Acquisition
    • RECON Series Quick Start Guides
    • Calibration Flight Strategy
    • Acquisition FAQs
    • Post Acquisition Checks
  • MissionGuidance
    • Introduction
    • Flightplans
    • Heightmaps
    • Setup
    • Operations
  • GNSS Hardware and Ground Control
    • Reference Stations
    • Downloading Reference Station Data
    • Ground Control - Best Practices
    • Stonex S-900 and Cube-A
  • Reports
    • Processing Report
    • Project Report
    • Trajectory Report
  • 3rd Party Software Documentation
    • Bathymetric LiDAR Processing in RiProcess
    • RiParameter
    • TerraSolid and Spatix Install
    • Orthomosaic Production with Pix4D
    • InertialExplorer Desktop 8.70 - 8.90 Processing
    • Hyperspectral Data Processing
    • SDCImport Filter Options
  • Image Processing using PhaseOne IXCapture
  • Converting HEIF and Raw Images to JPG using Sony's IEDT
  • General FAQ
    • Accuracy Standards & Quantification
    • Mapping Terms and Definitions
    • Abbreviations
    • Examples: How to ensure accurate Georeferencing of Trajectories and Pointclouds
    • Clock bias adjustment
    • General FAQs
  • Legacy Documentation
    • Offsets, Rotations, and Reference Frames: SpatialExplorer Version 4-7
    • Legacy TerraSolid Documentation
    • Legacy SpatialExplorer Documentation
Powered by GitBook
On this page
  1. Hardware and Interfaces
  2. Connecting and Interfacing with Phoenix Lidar Systems
  3. Connecting via SpatialExplorer
  4. User Interface
  5. Settings

Local Settings

Click here to jump to Spatial Explorer Local Settings details

PreviousNetworkNextSystem Monitor