Phoenix LiDAR Systems User Manual
search
Ctrlk
  • Welcome
  • SpatialExplorer 8 & 9
    • Introduction
    • Installationchevron-right
    • User Interfacechevron-right
    • Workflowschevron-right
    • FAQs
  • LiDARMill Cloud
    • Introduction
    • Login/Registerchevron-right
    • Quick Start Guide
    • Overview
    • Post Processing Workflowchevron-right
    • FAQs
  • FlightPlanner
    • Introduction
    • User Interfacechevron-right
    • Workflowchevron-right
    • Overlap
    • FAQs
  • Hardware and Interfaces
    • Warnings and Safety Noticeschevron-right
    • Connecting and Interfacing with Phoenix Lidar Systemschevron-right
    • NavBoxchevron-right
    • Camerachevron-right
    • Lidarschevron-right
    • Inertial Navigation Systemchevron-right
    • Miscellaneous Hardwarechevron-right
      • Mobile Roof Rackchevron-right
      • Wheel Sensor
      • Backpack Lidar Mountchevron-right
      • Wi-Fi Range Extenders
      • Accessorieschevron-right
        • Cableschevron-right
          • SMB to SMA GPS Antenna Cable
          • MCX to RP-SMA WiFi Antenna Cable
          • LiDAR / Camera Cable
          • micro USB to USB Type A Female Cable
          • RJ45 Ethernet Cable
          • HDMI Cable Type D to Type A
          • SMA to TNC Ground Mount GNSS Antenna Cable
          • 7.5” Rover GPS Antenna Cable
          • 24” Rover GPS Antenna Cable
        • Power Supply Partschevron-right
        • Antennaschevron-right
        • Other Componentschevron-right
        • Miscellaneouschevron-right
  • Data Acquisition and UAV Piloting
    • Flight Planningchevron-right
    • UAV Data Acquisition
    • Mobile Acquisition
    • Manned aircraft Acquisition
    • Backpack Acquisitionchevron-right
    • SLAM Acquisition
    • RECON UAV Acquisition
    • RECON Series Quick Start Guideschevron-right
    • RECON System Drawings
    • Navigation System Configurationchevron-right
    • Calibration Flight Strategy
    • Acquisition FAQs
    • Post Acquisition Checks
  • MissionGuidance
    • Introduction
    • Flightplans
    • Heightmaps
    • Setup
    • Operations
  • GNSS Hardware and Ground Control
    • Reference Stations
    • Downloading Reference Station Data
    • Ground Control - Best Practices
    • Stonex S-900 and Cube-Achevron-right
  • Reports
    • Processing Report
    • Project Report
    • Trajectory Report
  • 3rd Party Software Documentation
    • Bathymetric LiDAR Processing in RiProcesschevron-right
    • RiParameter
    • TerraSolid and Spatix Install
    • Orthomosaic Production with Pix4D
    • InertialExplorer Desktop 8.70 - 8.90 Processing
    • Hyperspectral Data Processing
    • SDCImport Filter Optionschevron-right
  • Image Processing using PhaseOne IXCapture
  • Converting HEIF and Raw Images to JPG using Sony's IEDT
  • General FAQ
    • Accuracy Standards & Quantificationchevron-right
    • Mapping Terms and Definitions
    • Abbreviations
    • Examples: How to ensure accurate Georeferencing of Trajectories and Pointcloudschevron-right
    • Clock bias adjustment
    • General FAQs
  • Legacy Documentation
    • Offsets, Rotations, and Reference Frames: SpatialExplorer Version 4-7
    • Legacy TerraSolid Documentation
    • Legacy SpatialExplorer Documentation
gitbookPowered by GitBook
block-quoteOn this pagechevron-down
  1. Hardware and Interfaceschevron-right
  2. Miscellaneous Hardwarechevron-right
  3. Accessories

Cables

This section describes all cables that ship with our systems.

SMB to SMA GPS Antenna Cablechevron-right

MCX to RP-SMA WiFi Antenna Cablechevron-right

LiDAR / Camera Cablechevron-right

micro USB to USB Type A Female Cablechevron-right

RJ45 Ethernet Cablechevron-right

HDMI Cable Type D to Type Achevron-right

SMA to TNC Ground Mount GNSS Antenna Cablechevron-right

7.5” Rover GPS Antenna Cablechevron-right

24” Rover GPS Antenna Cablechevron-right

PreviousAccessorieschevron-leftNextSMB to SMA GPS Antenna Cablechevron-right