Phoenix LiDAR Systems User Manual 8.0 - 9.0
⌘Ctrlk
Phoenix LiDAR Systems User Manual 8.0 - 9.0
  • Welcome
    • Introduction
    • Installation
    • User Interface
    • Workflows
    • FAQs
    • Introduction
    • Login/Register
    • Quick Start Guide
    • Overview
    • Post Processing Workflow
    • FAQs
    • Introduction
    • User Interface
    • Workflow
    • Overlap
    • FAQs
    • Warnings and Safety Notices
    • Connecting and Interfacing with Phoenix Lidar Systems
    • NavBox
    • Camera
    • Lidars
    • Inertial Navigation System
    • Miscellaneous Hardware
      • Mobile Roof Rack
      • Wheel Sensor
      • Backpack Lidar Mount
      • Wi-Fi Range Extenders
      • Accessories
        • Cables
        • Power Supply Parts
        • Antennas
        • Other Components
          • LiDAR/IMU Cable
          • LiDAR Cable
          • IMU Cable
          • AL3 Power Cable with Integrated Splitter
          • EC5 to XT60 Adapter Cable
          • LiPo with EC5 Connector
          • LiPo Charger
          • 5.8 GHz Directional Panel Antenna
          • TNC 90 Degree Adapter
        • Miscellaneous
    • Flight Planning
    • UAV Data Acquisition
    • Mobile Acquisition
    • Manned aircraft Acquisition
    • Backpack Acquisition
    • SLAM Acquisition
    • RECON UAV Acquisition
    • RECON Series Quick Start Guides
    • RECON System Drawings
    • Navigation System Configuration
    • Calibration Flight Strategy
    • Acquisition FAQs
    • Post Acquisition Checks
    • Introduction
    • Flightplans
    • Heightmaps
    • Setup
    • Operations
    • Reference Stations
    • Downloading Reference Station Data
    • Ground Control - Best Practices
    • Stonex S-900 and Cube-A
    • Processing Report
    • Project Report
    • Trajectory Report
    • Bathymetric LiDAR Processing in RiProcess
    • RiParameter
    • TerraSolid and Spatix Install
    • Orthomosaic Production with Pix4D
    • InertialExplorer Desktop 8.70 - 8.90 Processing
    • Hyperspectral Data Processing
    • SDCImport Filter Options
  • Image Processing using PhaseOne IXCapture
  • Converting HEIF and Raw Images to JPG using Sony's IEDT
    • Accuracy Standards & Quantification
    • Mapping Terms and Definitions
    • Abbreviations
    • Examples: How to ensure accurate Georeferencing of Trajectories and Pointclouds
    • Clock bias adjustment
    • General FAQs
    • Offsets, Rotations, and Reference Frames: SpatialExplorer Version 4-7
    • Legacy TerraSolid Documentation
    • Legacy SpatialExplorer Documentation
Powered by GitBook
For the complete documentation index, see llms.txt. This page is also available as Markdown.
  1. Hardware and Interfaces
  2. Miscellaneous Hardware
  3. Accessories

Other Components

LiDAR/IMU Cable

LiDAR Cable

IMU Cable

AL3 Power Cable with Integrated Splitter

EC5 to XT60 Adapter Cable

LiPo with EC5 Connector

LiPo Charger

5.8 GHz Directional Panel Antenna

TNC 90 Degree Adapter

PreviousRover 5.8 GHz Wi-Fi Antenna RP-SMANextLiDAR/IMU Cable