Phoenix LiDAR Systems User Manual

Welcome
SpatialExplorer 8
LiDARMill Cloud
Flight Planner
Hardware and Interfaces
Data Acquisition and UAV Piloting
MissionGuidance
GNSS Hardware and Ground Control
Reports
General FAQs
Mapping Terms and Definitions
Abbreviations
Accuracy Standards & Quantification
Examples: How to ensure accurate Georeferencing of Trajectories and Pointclouds
- Example 1: Static Datum
- Example 2: Dynamic Datum
3rd Party Software Documentation
Clock bias adjustment
Legacy Documentation

Powered by GitBook

On this page

Compute SOCS

PreviousCalculate Distance NextLiDARMill

Last updated 5 months ago

The Compute SOCS tool is used to recompute the original range and scan angle values associated with each point, which is necessary when optimizing a 3rd party LAZ using LiDARSnap. Compute SOCS takes the world position and back-calculates the scan angle and scan range using the trajectory and sensor model specified by the user: