# Changing the Trigger Interval / Distance

Based on your mapping needs, you may need to adjust the camera trigger interval time or horizontal trigger distance.

Within Spatial Explorer, go to ***Settings → Rover*** and then select the **Sony A6000 Lite** on the left (it will be listed as CAM0). 

The **interval** or **horizontal distance** can now be changed in the Acquisition tab under the "Camera Triggering" section.

![](https://lh6.googleusercontent.com/jKzgKIbr9WxrHCOzKNdNiXbV-FpiJoe4BlqPQcEZ-mCvU4cL03M9REz2VC6xlBFCPRUK3o4qKRyL2ounx50MWg898hF-eGGLhU8W8CKbZ8mOhkZniEA28hJmeBFj2B92TC7V4Zf4)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.phoenixlidar.com/hardware-and-interfaces/camera/a6k-lite-camera/operating-with-spatial-explorer/changing-the-trigger-interval-distance.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.