Ladybug5+ and LadybugCapPro

This section covers how to integrate the Ladybug5+ using SpatialExplorer and LadybugCapPro software.

The purpose of this document is to demonstrate how to setup and use the Ladybug5 camera in conjunction with Point Grey’s LadybugCapPro software and SpatialExplorer to trigger and capture a stream of images.

During this procedure, the Ladybug5 must be connected locally to your workstation via the attached USB 3.0 cable. We highly recommend connecting to rover via an Ethernet connection for this procedure.

This procedure will ONLY work with Ladybug5 cameras that have been configured by Phoenix LiDAR Systems after June 2018.

Last updated