Mission Guidance

Normally, manned acquisition requires two operators: a sensor-operator and a pilot/driver. The sensor operator will run SpatialExplorer on a laptop to control and monitor the sensors as usual. In addition, lines/paths/linestrings from KML/KMZ files can be imported and converted to flightlines. With a second display mounted in the pilot's field of view and connected to the laptop running SpatialExplorer, a simple and intuitive interface is shown to the pilot to help navigate along these flightlines in 3d.

Please refer to the following video for help regarding the operation of MissionGuidance

Click here to jump to the Mission Guidance section of the manual

Last updated